PRANCE metalwork là nhà sản xuất hàng đầu về hệ thống trần và mặt tiền bằng kim loại.
Integrating lighting into fire-rated ceilings demands fire-rated components and strict adherence to tested details. Standard recessed fixtures create openings that allow heat and flame to penetrate. To maintain rating, install UL Listed fire-rated housings or plaster frames designed to fit within the ceiling panel cutout. These housings contain intumescent pads that expand under fire, sealing the perimeter of the fixture. Seal any gaps with approved fire-stop sealants. Clearances around fixtures must match those in the fire test (often 25–30 mm), and the insulation above the fixture must remain undisturbed or be replaced with a compatible fire-rated insulation collar. All fixture penetrations should be documented, and the installer must verify that the lighting assembly is included in the fire-rated system’s official test report.
*Chúng tôi sẽ trả lời trong vòng 24 giờ. Nếu bạn không nhận được email của chúng tôi, vui lòng kiểm tra thư mục thư rác. Đối với các yêu cầu khẩn cấp, vui lòng liên hệ qua WhatsApp: +86-13809708787
* Vui lòng đảm bảo email và số điện thoại của bạn chính xác để chuyên viên của chúng tôi có thể liên hệ với bạn nhanh chóng, hoặc bạn có thể gửi tin nhắn đến số WhatsApp +86-13809708787