How customizable is Stick System Curtain Wall for different building heights and façade layouts

Question

Accepted Answer

Stick system curtain walls are highly customizable for a broad range of building heights and façade layouts, provided the design team tailors profiles, anchors, and movement provisions to project-specific conditions. For low- to mid-rise buildings, standard mullion and transom sections typically suffice, with anchors designed for local wind loads and serviceability limits. For taller buildings, the system can be adapted by increasing mullion section modulus, adding intermediate stiffeners, or using heavier-duty anchors to control deflection and accommodate increased wind pressures. The modular nature of stick systems allows designers to specify different unit heights, integrated spandrel locations, and varying sightlines across elevations to match architectural intent. Corner treatments, transition details to other cladding types, and integration of operable vents or sun shading are all feasible through custom extrusions, covercaps, and bracketry. The façade layout flexibility also extends to accommodating different glazing types, insulated panels, and solar control devices. However, as building height increases, coordination with structural engineers becomes more critical to ensure anchor loads and load paths are appropriate. Additionally, for buildings requiring very rapid enclosure, the on-site labor intensity of stick systems may influence decisions to hybridize with unitized modules in certain zones. In essence, stick systems can be highly customized for most heights and geometries, but each customization must be validated through structural calculations, mock-ups, and compatibility checks with other building systems.