S-Plank Ceiling Manufacturer & Supplier

PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.

S-Plank Ceiling

s-Plank Ceiling

Material	AA grade aluminum alloy
Surface Finish	Powder coating/PVDF /Painted/pre-painted and etc.
Height	30 mm
Thickness	0.7-1.0 mm
Length	100-6000 mm
Standard width	300mm
Custom width	150-600mm
Product Advantages	The attractive part about the S-Plank Ceiling is the resistance to wind.In addition, Providing the end closure piece is to ensure the flatness of the plate joint.

All s-Plank Ceiling products

no data

Distinctive Curves

The advantage of S-shaped aluminum ceilings lies in their unique curved design, which brings fluidity and visual focal points to a space, creating a distinctive modern ambiance.

Spatial Extension

The curved lines of S-shaped aluminum ceilings can enhance the visual height and depth of the ceiling, making the space appear more open and spacious while adding a sense of dimension to the interior.

Application Cases

s Plank Ceiling Installation Drawing

S Plank Ceiling ( With Carrier ) installation instructions

1 . Measure the elevation of the S plank ceiling after installation according to the requirements of the design drawings , measure the horizontal line of theceiling and fix the corner at the horizontal line around the wall

2 . Measure the construction direction To make hoisting holes on the ceiling of the building structure at a distance of < 1200mm , and fix the thread rodwith expansion screw

3 . Fix the carrier on the thread rod by direct hanging method and adjust the level . The carrier must be multilateral

4 . Install the S plank ceiling : buckle the S plank ceiling into the clamping position of the carrier in the same direction

5 . The size of the edge should be measured according to the site conditions , and the ceiling should be placed on the L angle6 . Keep your hands clean during the installation process , and there should be no sweat , oil , etc

4D Wood-grain Surface Finish

4D Wood Grain Surface Finish is a decorative finish that mimics the texture and appearance of real wood, providing a natural, warm feel. Has a 4D effect, giving an illusion of depth and dimension. It is applied to interior and exterior metal panels for durability and longevity.

P4WD-033

P4WD-034

P4WD-035

P4WD-036

P4WD-037

Printing Surface

Printed surface finish on metal panels is the process of transferring an image or pattern to the surface of a metal panel through printing technology, resulting in a high-resolution and vibrant surface finish.

PRT-001

PRT-002

PRT-003

PRT-004

PRT-005

Powder Coating Surface Finish

Powder coating is a popular surface treatment for metal panels in which a dry powder is applied to the metal surface and then heated to create a smooth and durable coating.

w95

w123

w420

w648

w9016

PVDF Surface Finish

PVDF surface treatment refers to the application of polyvinylidene fluoride coatings on metal surfaces to create a durable and weather-resistant finish. This coating makes it suitable for a wide range of outdoor applications.

PR-202

PR-203

PR-302

PR-402

PR-1018

Glass-Look Surface Finish

The glass-look finish of metal trim panels is achieved by applying a high-gloss, clear coating to the surface that mimics the look of glass.

PG-001

PG-002

PG-003

PG-004

Wood-Grain Surface Finish

Woodgrain finishes are available for interior and exterior decorative metal panels, providing a natural, warm aesthetic that resembles the look of solid wood. By cooperating with international top wood grain material suppliers, we can provide more than 10 years of quality assurance.

9V005-452UM309C

9V005-452UM363C

99135-402C25101T3UE

99315-412UM309C

99347-404UM309C

Stone-Grain Surface Finish

A stone grain finish is a finish that creates a realistic stone texture on metal decking. It is suitable for indoor and outdoor applications.

PST-001

PST-002

PST-003

PST-004

PST-005

Anodized Cooper & Bronze Surface Finish

Copper Aluminum Distressed finish can achieve an aged or weathered look, giving it a vintage or antique look. This is usually achieved through chemical treatments or coatings that create a patina or rust effect on the surface.

PLC-023

PLC-024

PLC-025

PLC-026

PLC-027

Anodized Surface Finish

Anodized finish that enhances the natural beauty of metal trim panels for durability and corrosion resistance. The process blends color into the metal rather than painting it, resulting in a finish that retains the material's natural metallic appearance.

PFJ-BC20

PFJ-BC40

PFJ-RC23

PFJ-RC65

PFJ-SR90

Pre-Coating Surface Finish

The pre-coat finish of the metal panels ensures consistent color and texture throughout the lot, as the coating is applied to the metal coils before they are cut and formed into panels.

LYL57-707

LYL57-715

LYL57-731

LYL57-734

LYL57-768

Interested?

Request a call from a specialist

Tailor-make profect solutions for your metal ceiling & wall projects. Get a complete solution for customized metal ceiling & wall projects. Receive technical support for metal ceiling & wall design,installation & correction.