PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
A glass curtain wall system is an exterior building enclosure made of glazing, aluminum framing, gaskets, sealants, anchors, and drainage details. It is designed to resist weather exposure and transfer facade loads to the building structure.
The glass is the most visible part, but it is not the entire system. Water management, thermal performance, structural movement, wind resistance, glazing retention, and maintenance access depend on how all components work together.
The main curtain wall system types are defined by where the facade is assembled and how it is installed.
|
|---|
Stick-built and unitized systems are the two principal approaches to commercial curtain wall delivery. Semi-unitized construction sits between them by combining factory-prepared components with site assembly.
In architectural structures, horizontal beams are added and glass or curved panels are installed within the completed frame structure. This approach is commonly used for low-rise and mid-rise buildings, renovation projects, bases, irregular facades, and projects requiring adjustments to on-site dimensions or external conditions. It is also applicable to entrances, curved transition areas, and areas with limited modular repetition.
For architects and designers, the main advantage lies in its flexibility. This system can adapt to different span widths, special connection methods, and changes between different facade areas. However, the final visual effect of the facade largely depends on on-site measurements, installation sequence, sealing treatment, glass quality, and construction inspection conditions.
PRANCE explains the basic sequence in its curtain wall construction guide: The project begins with engineering facade design, followed by window sash installation, beam installation, glass installation, and sealing treatment. The actual project must follow the approved workshop drawings and engineering requirements, rather than merely relying on general installation outlines.
The unitized curtain wall system is composed of prefabricated exterior wall modules. One unit may include an aluminum frame, glass, fan-shaped panels, sealing strips, waterproof sealant and drainage components. These components are pre-assembled and delivered before leaving the factory.
On the construction site, each unit is lifted and connected to the building structure in the predetermined sequence. This method is particularly suitable for high-rise buildings and large commercial buildings that use repetitive floor modules. Factory pre-assembly can reduce the demand for glass and sealing materials during on-site construction, thereby minimizing the additional workload caused by changes in on-site conditions.
For developers and owners, when the design is determined early and the manufacturing logistics management is good, the unitized construction helps achieve efficient exterior wall installation.
The unitized system is not suitable for all high-rise buildings. Irregular geometric shapes of height, design change delays, restricted lifting space or scattered curtain wall areas may all lead to the selection of other more suitable construction methods.
For more detailed comparison, please refer to Unitized vs. Prefabricated Curtain Wall Systems.PRANCE’s glass curtain wall system selection guide also discusses stick-built and unitized approaches in relation to performance and project risk.
The assembly logic of the semi-unitized curtain wall system involves installing the vertical and horizontal frame structures on-site, while the glass + secondary frame panel modules are pre-assembled in the factory. The factory-prepared glass panels are then inserted into the frame for fixation, which is a compromise solution.
The specific construction method varies depending on the supplier, but it typically offers more factory pre-processing than the unitized system and has greater flexibility for adjustment compared to the fully unitized exterior wall system.
This solution is suitable for medium-height commercial buildings, projects with moderate repetitiveness, or sites where it is difficult to transport and lift the complete unitized modules. Additionally, this method can also play a role when it is necessary to make appropriate adjustments to the curtain wall based on actual on-site deviations.
Before adopting the semi-unitized approach, the project team should determine which projects have been completed in the factory and which ones are still to be carried out on-site.
Curtain wall, storefront, and window wall may look similar from a distance, but they use different installation concepts.
|
|---|
Developers should not select a system by appearance alone. The correct choice depends on building height, attachment method, wind exposure, thermal requirements, glass dimensions, movement, water management, and applicable regulations.
As a manufacturer that combines design and customization for curtain walls, PRANCE places great emphasis on creating a strong modern commercial building identity through the combination of glass curtain walls, metal panels, aluminum grilles, and artistic perforated aluminum panels, thereby avoiding the monotony of large areas of pure glass curtain walls.
When your commercial building desires to break away from the monotonous and uniform architectural style, PRANCE ingeniously combines wave-shaped aluminum grilles into glass curtain wall systems, allowing natural light to enter while providing necessary sun-blocking shading to ensure office comfort.
Perhaps you may be confused about how to reduce the coordination with various major building material suppliers. What is worth noting is that choosing PRANCE, a high-quality supplier that offers one-stop services, can help you save on communication, time and cost.
The system-selection process should begin with building conditions, not product preference.
Architects and designers should first define the facade geometry, module rhythm, visible joints, glazing requirements, and adjacent materials. Developers and owners should then review programme, budget, maintenance, replacement access, and operating requirements.
PRANCE provides glass curtain wall systems, aluminum facade products, and customized architectural solutions for commercial projects. Its services can support facade material selection, panel or frame customization, drawing coordination, and project-oriented manufacturing preparation.
For complex projects, PRANCE can work with developers, architects, facade contractors, trading companies, and procurement teams. However, the final facade system must be reviewed against the actual building structure, local codes, project performance requirements, and approved engineering documents.
1. What are the main types of curtain wall systems?
The main types are stick-built, unitized, and semi-unitized curtain wall systems. Structural glazing and point-supported glass are additional facade approaches.
2. What is a semi-unitized curtain wall system?
It is a hybrid curtain wall approach that combines factory-prepared components with site-installed framing or connections.
3. Which curtain wall system is suitable for high-rise buildings?
Unitized systems are often considered for repetitive high-rise facades because they use factory-assembled modules. The final choice still depends on lifting access, geometry, engineering, delivery logistics, and project requirements.
4. Is a glass curtain wall load-bearing?
No. A curtain wall is generally a non-load-bearing exterior system that transfers its own loads back to the building structure through anchors and framing.
5. What should a contractor provide when requesting a curtain wall quotation?
Provide drawings, facade dimensions, glass requirements, finishes, performance specifications, quantities, project location, delivery requirements, and expected installation sequence.
*We will reply within 24 hours. If you don't receive our email, please check your spam folder. For urgent inquiries, please reach out via WhatsApp: +86-13809708787
* Kindly ensure your email and phone number are correct so our specialist can reach you promptly, or you can send a message to our whatsapp +86-13809708787