How should integrated ceilings in different spaces be cleaned and maintained?

Integrated ceilings are easy to install, beautiful and fashionable, and are a highly sought-after ceiling method on the market. However, the ceiling will inevitably become stained after being used for a long time, and the same goes for even the most stain-resistant ceiling materials. Therefore, the maintenance and cleaning of the suspended ceiling is directly related to the long life of the suspended ceiling. However, the maintenance methods of integrated suspended ceilings in different spaces are also different. Lets follow the editor to see how to maintain the integrated suspended ceilings in each space!

1. Cleaning of kitchen ceiling

For the ceiling in the kitchen, everyone will choose brushed or nano-boards, which generally have good oil resistance and can be wiped with a soft cloth. However, if it has not been cleaned for a long time, the suspended ceiling will absorb a lot of oil stains. At this time, use a small amount of detergent and a soft cloth with strong water absorption to wipe it with water.

2. Cleaning of bathroom ceiling

Generally speaking, there are no oil stains in the bathroom, so it is easy to take care of and clean. However, there is a lot of water vapor in the bathroom. When choosing a bathroom ceiling, pay attention to choosing a ceiling material with good waterproof properties. Just wipe the bathroom ceiling with a soft cloth to remove moisture. Generally, every one or two months, you can clean the bathroom ceiling regularly using the same method as cleaning the kitchen ceiling.

3. Cleaning of ceilings in other spaces

Suspended ceilings in living rooms, bedrooms, corridors and other spaces rarely face oil stains or moisture, so the cleaning of suspended ceilings in these spaces mainly involves dust removal. You can usually use a soft cloth to remove dust.

4. Maintenance of integrated ceiling heating module

Do not switch the heating module on and off frequently, and make sure there is no major vibration around it during operation, otherwise it will affect the service life of the heating bulb. When turning it on after a long period of non-use, do a circuit and bulb check. Turn it on for 3-5 minutes first to see if operating normally. If you encounter problems, please ask professional technicians to repair them.

5. Maintenance of integrated ceiling lighting modules

Try not to switch on and off frequently when using the lamp, because at the moment of frequent startup, the current passing through the filament is greater than the current during normal operation, which will cause the temperature of the filament to rise sharply and accelerate sublimation, thus greatly reducing its service life. In addition, after the lamp is used for a period of time, the luminous flux will drop significantly and the lamp will become darker and darker. At this time, attention should be paid to replacing the new light source in time.

6. Maintenance of integrated ceiling ventilation module

Do not switch the integrated ceiling ventilation fan on and off frequently, remove oil stains regularly, and do not use corrosive chemical solutions when cleaning, otherwise the plastic parts and outer paint will be easily damaged. Lubricating oil should be added to the motor regularly. When reinstalling the ventilation fan after cleaning, the blade nuts must be tightened to prevent the blades from rotating and flying out after power is turned on, causing an accident.