How to avoid unevenness in aluminum ceilings?

There are two installation methods for aluminum ceilings: light steel keels and wooden keels, because the wood will be affected by temperature and humidity and deform. (You will know the degree of deformation of the solid wood floors and doors in your home in humid summers and dry winters.) Therefore, as time goes by, there will be great deformation between various wooden boards, and some small deformations will occur. Deformation, then the result. It is the uneven deformation of the ceiling. On the contrary, the installation method of light steel keel is more preferable, because all the materials on the ceiling are metal, which will minimize the deformation. In order to avoid the unevenness of the aluminum oxide ceiling, PRANCE ceiling manufacturer reminds you to pay attention to the following points during the decoration and construction process.

(l) The purchased aluminum ceiling and related keels and accessories must meet product quality requirements and must not be bent or deformed.

(2) During transportation and stacking, the aluminum ceiling should be flat and pressure-free to avoid erosion by high-temperature harmful substances.

(3) When installing flat keels, the spacing deviation should be controlled within the allowable range of 1.5 microns.

(4) When installing the aluminum ceiling, if there is a deviation in size, it should be adjusted first and then inserted in order. It should not be inserted hard to prevent deformation.

(5) Headlights, exhaust fans and other items should be fixed separately by the keel and should not be placed directly on the aluminum ceiling.

As long as you pay attention to the above five points, you can basically achieve the solid effect of the aluminum ceiling and avoid uneven phenomena. During the construction process, if necessary, methods such as rulers and hand measurements can be used for observation and inspection.