PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
What are the installation methods of aluminum honeycomb panel curtain wall?
Are you curious about the installation methods of aluminum honeycomb panel curtain walls? Look no further! In this blog, we will dive into the various techniques used, ensuring a seamless and efficient installation process. So, let's get started!
China's building materials market is a product of reform and opening up. With the adjustment of national policies, the introduction of various norms and the rapid economic and social development. The types of building materials industry also keep pace with each other, among which exterior wall decoration has greater market demand.
With the continuous development of the improvement of people's living standards, industrial mechanization, urbanization acceleration, new rural construction process and the rise of the real estate economy, the building materials industry has experienced a stage from scratch, from decentralization to concentration.
Driven by the commercialization of housing in the 1980s, the rise of public buildings and residential decoration stimulated the production, circulation and consumption development of building exterior wall materials and home furnishings, which were almost blank before the reform and opening up. Driven by this background, the scale of the building materials market has continued to grow steadily, and aluminum honeycomb panel curtain walls have been favored by more consumers.
Aluminum honeycomb panel curtain wall is currently a newer exterior wall decoration material. The installation method of such a good building exterior wall also makes people have to learn. Today, PRANCE aluminum honeycomb panel manufacturer will tell you how to install this kind of curtain wall?
There are three main methods for installing aluminum honeycomb panel curtain wall
1. Lift ear type
This installation method is a separate type of lifting lugs and honeycomb panels. The lifting lugs are processed separately and then connected to the glue joint position of the honeycomb panel. The suitable width of the glue joint is 12mm. This installation method makes processing simple and easy to install.
2.Flange type
This installation method is to process the flange for installation when processing the aluminum honeycomb panel. The installation only needs to touch the mounting connection with the keel and the glue joint. The suitable glue joint width is 10mm. This method is easy to install, but the processing is slightly complicated. Not suitable for molded curtain wall panels.
3. Buckle type
This node is an aluminum buckle type. The buckle is a specific profile and is easy to install. However, this method requires high plate processing accuracy and is not recommended for plates with a length greater than 3000mm. According to the width of the buckle, the center seam of the board is 20mm and 40mm.
In conclusion, the installation methods of aluminum honeycomb panel curtain walls vary depending on the specific requirements of the project. The common methods include wet sealant joint, dry gasket joint, and structural adhesive bonding. Each method has its advantages and disadvantages, offering different levels of flexibility, durability, and weather resistance. It is important for architects and contractors to carefully consider these factors to ensure a successful installation that meets both functional and aesthetic requirements. Proper installation is crucial to maximize the performance and longevity of aluminum honeycomb panel curtain walls.
