PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
A window wall is installed between floor slabs, one level at a time. A curtain wall is a continuous exterior facade that hangs from the building structure and can span multiple floors.
Both systems use aluminum framing and glass, and both are non-load-bearing. The main difference is where they connect to the building: a window wall relies on the slab above and below, while a curtain wall transfers loads back to the structure through engineered anchors.
A window wall is a floor-to-floor glazed system installed between concrete or steel floor slabs.
Because it is installed floor by floor, a window wall is well suited to apartment buildings, hotels, student housing, and other projects with repeated floor layouts. The system is often easier to transport, install, and replace than a large curtain wall module.
The concrete slab also separates one floor from the next. This can reduce vertical sound transmission between levels, which is a practical benefit for residential and hospitality buildings.
Unlike a window wall, it does not rely on the slab above and below for support. Instead, engineered anchors transfer wind loads, dead load, and movement back to the primary structure.
Curtain walls can be built as stick systems or unitized systems. PRANCE stick-built systems are assembled on site, while unitized systems arrive as factory-assembled modules that are lifted into place.
The slab edge connection is the clearest difference between the two systems.
A window wall sits within the slab-to-slab opening. Its frame connects at the slab edge, and the concrete slab above and below helps support and align the system.
A curtain wall is usually positioned outside the slab edge. It hangs from anchors connected to the building structure, allowing the facade to continue across floor lines rather than stopping at every slab.
|
|---|
A curtain wall can provide stronger thermal performance when it uses continuous thermal breaks, insulated glazing, and well-designed frame details. PRANCE curtain walls generally achieve better air and water resistance and continuous thermal performance when correctly detailed.
For either system, thermal performance depends on the complete assembly: glass U-value, solar heat gain coefficient, frame thermal break, spacer, sealant, insulation, and installation quality. The project team should confirm the required U-value, SHGC, air infiltration, and water penetration targets before selecting a system.
A curtain wall is often selected for high-rise towers because it can span multiple floors and accommodate structural movement, wind loads, and complex facade geometry.
A window wall is commonly used in mid-rise residential and hotel projects because it is modular, economical, and installed floor by floor.
A window wall can be engineered for taller buildings if the wind load, slab connection, fire strategy, and movement requirements are addressed. Likewise, a curtain wall may be unnecessary for a low-rise building if a window wall meets the performance and design requirements.
Window walls are generally simpler and more economical for repetitive mid-rise projects. Their smaller units are easier to handle, and installation can often proceed floor by floor.
Curtain walls usually require more engineering, larger modules, more precise slab coordination, and more complex lifting or installation planning. A unitized curtain wall can speed up enclosure on suitable high-rise sites, but it often has a higher upfront cost and longer lead time.
Window walls can provide good acoustic separation between floors because the concrete slab divides each level. This makes them attractive for apartments, hotels, and dormitories where residents value privacy and quiet.
Curtain walls can also achieve strong acoustic performance, especially when they use laminated glass, insulated glazing, and well-sealed joints.
The acoustic result depends on the complete system, not just the glass type. Frame seals, gaskets, cavity design, and installation quality all affect how much noise enters the building.
Choose a window wall when the project has repeated floor layouts, a mid-rise height, and a priority on cost, installation speed, or acoustic separation between floors.
It is commonly suitable for:
For more detail, check on which building types are more practical for window walls.
Choose a curtain wall when the project needs a continuous glass facade, higher wind and water performance, complex geometry, or a premium architectural appearance.
It is commonly suitable for:
PRANCE provides glass curtain wall systems, including stick-built, unitized, semi-hidden frame, and custom solutions for commercial and high-rise projects.
For projects considering a curtain wall, PRANCE provides aluminum-framed facade systems with glazing and configuration options designed for different architectural requirements.
Its curtain wall glazing systems can be reviewed when comparing stick-built and unitized approaches, frame finishes, glazing options, and facade detailing.
For projects that combine transparent glazing with opaque exterior sections, aluminum curtain wall panels provide another relevant reference for spandrel and non-vision areas.
PRANCE's Foshan High-Tech Tower facade project is also relevant as an example of coordinating several facade components within one complex exterior envelope. The project illustrates the importance of precise fabrication, panel identification, and coordination between manufacturing and on-site installation.
These references can help project teams begin a technical discussion. Final system selection should still be based on the project's drawings, applicable codes, required test results, and verified engineering specifications.
A window wall is installed between floor slabs. A curtain wall hangs from the building structure and can span multiple floors.
Curtain walls are often chosen for high-rise buildings because they can span floor lines and handle wind loads and structural movement. A window wall can also be engineered for taller buildings when the design supports it.
Curtain walls often perform better because they can use continuous thermal breaks and fewer slab interfaces. Window walls can perform well, but slab edges need insulation and careful detailing.
Yes. Where a curtain wall creates a gap between the exterior facade and a fire-resistance-rated floor, a compliant perimeter fire-containment system is generally required.
Window walls are often practical for apartments and hotels because they are modular, cost-effective, and separated by floor slabs, which can improve acoustic separation.
*We will reply within 24 hours. If you don't receive our email, please check your spam folder. For urgent inquiries, please reach out via WhatsApp: +86-13809708787
* Kindly ensure your email and phone number are correct so our specialist can reach you promptly, or you can send a message to our whatsapp +86-13809708787