PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
In the United Arab Emirates, for the same "aluminum cladding", the quotations can vary by as much as twice or even more. The reason is that the corresponding fire resistance rating, core material, aluminum plate thickness, coating, keel system, installation conditions and project responsibility scope are completely different behind each quote.
For ordinary low-rise decoration projects, basic ACP or standard aluminum plates may be sufficient; but for high-rise buildings and large commercial complexes, choosing a lower-priced product may result in higher costs during the approval, installation, rework and maintenance stages.
Through a real case, we will help you select the cost-effective metal cladding.
The inherent nature of the material is the first and crucial factor determining the price. The prices of different materials vary greatly. In metal exterior walls, the purity and composition of aluminum alloy directly affect its tensile strength and service life. Therefore, the price is slightly higher than that of other materials.
In the United Arab Emirates, many local small sheet metal factories often use the ordinary A1100 series aluminum material to offer lower prices. This material is relatively soft and, when used in high-rise buildings or projects near the sea, it is prone to macroscopic deformation under strong wind loads.
PRANCE solid aluminum panels strictly follow international ASTM and EN standards. In response to the high wind pressure and dusty environment in the Middle East, a strict raw material direct supply supply chain has been established to provide high-strength building-grade aluminum alloys. Architects are allowed to increase the physical span of a single panel, thereby significantly reducing the steel usage of the rear large keels. The cost-effectiveness has been redefined from the source.
The summer temperature in the United Arab Emirates can reach as high as 50°C, and it is constantly accompanied by intense ultraviolet (UV) rays as well as strong sea winds mixed with fine sand particles. It is a very challenging test for the panel's weather resistance.
Many local spray painting factories in the United Arab Emirates use conventional single-layer powder coating or domestic fluorocarbon coatings. Under extreme sunlight, the coating often undergoes severe powdering and fading within 2-3 years due to ultraviolet radiation. The cost of re-coating later is often several times that of the initial installation.
To pass the rigorous weather resistance test, PRANCE 's outdoor wall panels are all produced on an automated dust-free assembly line. The company mainly promotes a PVDF fluorocarbon three-coat system containing over 70% Kynar 500 resin. This coating can form a firm fluorocarbon layer on the aluminum surface, not only preventing physical wear from sandstorms but also effectively reflecting infrared rays, reducing the energy consumption of air conditioning in the building interior. The maintenance cost of the panels is minimized to the extreme.
After experiencing several high-rise building fires that shocked the world, the Ministry of Interior of the United Arab Emirates has introduced the world's most stringent fire safety regulations——《UAE Fire and Life Safety Code of Practice》
Some of the older composite panel production lines in the Middle East, due to technical limitations, have a high rate of defective products when producing non-flammable core materials, resulting in extremely expensive compliant fire-resistant composite panels.
The PRANCE exterior metal curtain wall cladding is fundamentally centered on absolute safety. Their aluminum panels, aluminum honeycomb panels, and U-shaped strip fasteners for exterior walls achieve natural A1/A2 level physical non-combustibility in terms of material. When heated, they will never produce toxic smoke.
The products have not only passed the ISO9001:2000 international quality management system certification, but also fully meet the fire safety entry standards of the Middle East market, enabling owners and contractors to fundamentally avoid the huge risks of being forced to stop work or rebuild due to non-compliance with fire regulations.
The modern architecture of the United Arab Emirates is highly futuristic, featuring irregular geometric shapes such as hyperbolic surfaces, three-dimensional folded panels, and perforated transparent elements that keep emerging.
Local processing plants in the Middle East often lack top-notch deep design teams. It is difficult to produce complex hyperbolic surfaces or precise perforated nets. Relying on on-site manual stitching, not only is it prone to material waste, but it also leads to low efficiency.
PRANCE provides a complete set of digital engineering support from 3D point cloud scanning, deep layout and drawing to structural sampling. Whether it is the Expanded Metal Mesh favored in Dubai or the geometrically strong U Baffle System, high-precision five-axis CNC machines can be used to ensure that the error of each custom-shaped plate at the factory is controlled within the millimeter range. This high-precision factory prefabrication avoids the waste of secondary cutting at the site in the United Arab Emirates due to production.
In the large-scale projects in the United Arab Emirates, which often cover tens of thousands of square meters, the performance of the supply chain directly determines the stability of the project cost.
Most of the local sheet metal and building materials manufacturers in the United Arab Emirates are small and medium-sized factories. When faced with a single order of several tens of thousands of square meters, they often lack the bargaining power for bulk purchases of raw materials. Moreover, due to their limited production capacity, they have to extend the construction period to several months, thereby forcing the project owner to bear huge overtime costs.
PRANCE possesses extremely strong capabilities in fulfilling large-scale overseas projects. For instance, in the iconic Emaar Beachfront project in Dubai, valued at 5 million US dollars, this team successfully delivered a balcony metal ceiling and facade system covering an area of up to 50,000 square meters.
Facing Emaar's extremely strict quality control standards and tight schedule deadlines, they relied on a powerful domestic manufacturing cluster. Not only did they achieve seamless connection of multiple batches of goods, but also, with such a huge production volume, they provided the developer with highly competitive wholesale prices on a large scale, perfectly aligning with the budget control goals of the project.
When many purchasers are calculating their budgets, they often only focus on the surface price of "how much is the aluminum sheet per square meter", but overlook the rear frame system and the high labor costs for on-site installation.
The costs of local labor, scaffolding and large-scale lifting machinery rental in the United Arab Emirates are extremely high. Traditional local suppliers only provide scattered sheets of materials, leaving the complex assembly process all to be carried out at the construction site.
PRANCE has vigorously promoted off-site fabrication in the United Arab Emirates. Before shipment, the keel hangers and aluminum panels were assembled and calibrated in the factory using high-precision molds. After arriving at the construction site in the United Arab Emirates, they can be directly modularly lifted. This reduces the on-site installation period by nearly 40%, saving contractors an astonishing amount of high-altitude labor costs and equipment rental fees.
In the highly competitive and demanding UAE construction market, choosing metal exterior wall materials is far more than just a simple comparison of unit prices. It is a multi-dimensional balancing act among material grade, civil defense regulations, aesthetic performance, and on-site high-altitude construction efficiency.
With over 20 years of experience in international construction project execution of building materials, PRANCE have strong factory manufacturing capabilities and profound understanding of local engineering projects to provide you with a one-stop exterior wall system solution, covering from detailed drawing design, high-precision mock-up production, large-scale rapid manufacturing to systematic overall delivery.
A: PVDF must be chosen. PRANCE uses a high-grade three-coat PVDF coating, which is extremely resistant to sun exposure and sand, and can keep the exterior walls from fading for several decades.
A: Absolutely. Their aluminum panels and aluminum honeycomb panels have natural A1/A2 level physical non-combustibility, and 100% comply with the UAE civil defense and fire protection regulations.
A: Yes. PRANCE offers an integrated production process from 3D drawing refinement, precise disassembly to factory CNC (Computer Numerical Control) manufacturing, ensuring that each non-circular panel fits perfectly together.
*We will reply within 24 hours. If you don't receive our email, please check your spam folder. For urgent inquiries, please reach out via WhatsApp: +86-13809708787
* Kindly ensure your email and phone number are correct so our specialist can reach you promptly, or you can send a message to our whatsapp +86-13809708787