PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
A curtain wall is a non-load-bearing exterior facade that spans across multiple floors and hangs from the building’s structural frame. A storefront is a lighter glazing system usually installed at ground level within a single-story opening.
Both systems are constructed with aluminum frames and glass, and can provide protection from rain and wind, as well as natural lighting and views of the landscape. The differences lie not only in the appearance, but also in their respective application scenarios, as well as their supporting methods, waterproof performance, and the degree of design for resisting wind and swaying.
A storefront is a common commercial aluminum and glass frame system, usually used for retail store facades, building entrances, lobbies, and ground-level glass curtain walls.
The foyer does not bear the structural load of the building; instead, it transfers the wind load and its own weight to the surrounding window sills, window heads, window frames, floor slabs, or supporting frames.
Due to its design being suitable for shorter spans, storefront frames are usually shallower than curtain wall frames. This makes them an ideal choice for retail entrances or the facades of low-rise commercial buildings.
A curtain wall system is a non-load-bearing exterior envelope that is attached to the building structure at floor lines. It can run continuously across several floors, which is why it is common on office towers, hotels, hospitals, shopping centers, and other multi-story buildings.
The system transfers wind loads and its own dead load back to the primary structure through anchors, brackets, and engineered connections. It does not support the floors or roof.
|
Comparison Factor |
Curtain Wall |
Storefront |
|
Typical application |
Large facades, multi-story buildings, and commercial towers |
Retail entrances, ground-floor shops, and low-rise commercial spaces |
|
Structural role |
Non-load-bearing exterior facade attached to the building structure |
Glazing and entrance framing installed within a building opening or designated facade area |
|
Installation |
Stick-built or unitized, depending on the system |
Commonly assembled on site using aluminum framing components |
|
Design requirements |
Can accommodate demanding wind loads, movement, and larger facade configurations when engineered accordingly |
Suited to the spans and loads permitted by the selected storefront system |
|
Thermal performance |
Available with different glazing and frame performance options |
Available in non-thermal and thermally improved configurations, depending on the product |
|
Water management |
Designed with system-specific seals, drainage, and interfaces |
Uses system-specific seals and drainage provisions |
|
Initial cost |
May be higher when engineering, fabrication, access, and installation requirements are more complex |
Often economical for straightforward, smaller-scale commercial openings |
|
Common applications |
Office buildings, hotels, institutional buildings, and large glazed facades |
Shops, restaurants, commercial entrances, and low-rise offices |
These are typical differences rather than universal rules. Some storefront systems are specifically designed for demanding applications, while certain curtain wall products are suitable for low-rise buildings. The appropriate system should be determined based on the manufacturer's technical documentation and the performance requirements of the project.PRANCE also explains the difference between curtain wall and window wall in its related guide.
Water management is one of the most important differences between the two systems.
A storefront typically directs water that enters the system toward the sill flashing, where it drains out. This works well for many ground-level applications, but the drainage path is concentrated at the bottom of the system.
A curtain wall uses a more layered approach. It commonly includes pressure-equalized compartments, internal gutters, gaskets, and weep holes. Water is managed at multiple horizontal positions rather than relying only on drainage at the sill.
This is why curtain walls are often selected for exposed elevations, taller buildings, and locations with higher wind-driven rain exposure.
A storefront is often installed more like a window system. The contractor sets the sill, jambs, and head, installs transoms if required, then glazes the system and seals the perimeter.
A curtain wall has a more complex installation sequence because it must coordinate anchors, floor lines, movement joints, drainage, and glazing. A stick-built curtain wall is assembled on site from mullions, transoms, and glass; a unitized curtain wall arrives as factory-assembled modules that are lifted into place.
PRANCE explains that unitized glass wall systems are factory-assembled, typically one floor high, and arrive glazed and sealed in advanced. This can reduce field joints and improve quality control on high-rise projects.
A storefront is often the more economical choice for a straightforward ground-floor retail facade or commercial entrance. A curtain wall may be more appropriate when the project requires larger glazed areas, greater structural capacity, specialized installation, or other demanding performance features.
The final price depends on the project rather than the system name alone.
For example, a small storefront with standard glazing and simple connections may be relatively straightforward to fabricate and install. The price will cheaper than curtain wall naturally. A large curtain wall with complex geometry, specialized glass, and difficult site access may require more engineering and construction coordination. Normally will higher than storefront system.
However, both systems can be customized, and the cost difference can change significantly when specifications change.
To compare prices accurately, provide suppliers with the facade dimensions, glass requirements, design pressures, thermal targets, finish specifications, installation conditions, and relevant code requirements.
|
|---|
The facade had curved and irregular shapes. Standard glass panels could not match the building’s geometry, and manual measurement would be difficult and less accurate.
PRANCE used 3D laser scanning to capture the curved facade. The scan data was used to make custom glass curtain wall panels and installation drawings. This helped the panels fit the building’s curved design and reduced installation errors.
The best system is the one that satisfies the project's functional, structural, environmental, and budget requirements.
Step 1: Identify the Application
Determine whether the project involves a retail entrance, ground-floor commercial opening, low-rise facade, or large multi-story exterior wall.
Step 2: Confirm Structural and Performance Requirements
Establish the required wind resistance, span, deflection limits, air and water performance, thermal performance, and safety glazing provisions.
Step 3: Select the Glass and Aluminum Framing
Consider glass type, insulating glass construction, coatings, frame depth, sightlines, thermal breaks, and finish options.
Step 4: Review Installation and Maintenance
Confirm how the system will be fabricated, transported, installed, inspected, cleaned, and repaired.
Step 5: Compare Complete Project Costs
Request quotations based on consistent specifications. Include materials, engineering, installation, testing, and anticipated maintenance requirements.
A like-for-like comparison makes it easier to determine which system offers the best value for the project.
For commercial facade projects, explore PRANCE's glass curtain wall systems to review available options and discuss project-specific requirements.
Before making a decision, compare the actual system specifications, installation conditions, and long-term costs. This approach helps ensure that the selected glazing solution meets the building's needs without paying for features the project does not require.
To explore facade options for your next commercial project, visit PRANCE Glass Curtain Wall Systems and consult the supplier about your project requirements.
A curtain wall spans multiple floors and hangs from the building structure, while a storefront is usually a single-story glazing system installed between the floor and the structure above.
Generally, yes. Storefront systems are usually simpler and use shallower framing, while curtain walls require more engineering, anchoring, drainage, and installation coordination.
It can be used where the design, structural support, and performance requirements allow it. However, a storefront is not automatically suitable for multi-story exterior facades or high-wind conditions.
A storefront is commonly used for retail entrances, shopfronts, and ground-floor commercial glazing because it is designed for shorter spans and simpler installation.
A curtain wall is usually more appropriate for high-rise buildings because it can span floor lines and transfer loads back to the primary structure at each floor.
*We will reply within 24 hours. If you don't receive our email, please check your spam folder. For urgent inquiries, please reach out via WhatsApp: +86-13809708787
* Kindly ensure your email and phone number are correct so our specialist can reach you promptly, or you can send a message to our whatsapp +86-13809708787