PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
FAQ
Pre-installation protocols include lab tests (ASTM/EN), full-scale façade mock-ups, onsite water and air tests, and qualification of welds and finishes.
2025
12
30
Protect panels with proper crating, padded support, vertical storage racks, climate-controlled storage, and careful lifting to prevent distortion and finish damage.
2025
12
30
Typical warranties cover materials and workmanship (5–10 years), IGU seals (5–10 years), with clear supplier obligations for defects, response times, and remediation.
2025
12
30
Seismic anchorage requires flexible connectors, slotted anchor plates, energy-dissipating details, and robust backup structure to transfer loads safely into the primary frame.
2025
12
30
Fire strategies include compartmentation, fire-rated spandrels, vertical fire breaks, fire-resistant glazing, and compliant smoke control and ventilation details.
2025
12
30
Integrate PV and shading with thermal breaks, structural reinforcement, drainage continuity, and electrical routes; pre-test mock-ups to validate performance.
2025
12
30
Costs vary widely: repair and targeted replacements are cheapest short-term; retrofit and reclad are costlier but improve performance and reduce long-term maintenance.
2025
12
30
Joints must accommodate multi-axis movements—thermal expansion, interstory drift, and sway—without losing weather seals or structural integrity.
2025
12
30
Thermal breaks and insulation reduce cold surface temperatures; frame material choices and continuous thermal separation mitigate interior condensate and mould risks.
2025
12
30
Wind load analysis dictates mullion sizing, anchorage, glazing selection, and deflection limits—core drivers for choosing stick, unitized, or structural systems.
2025
12
30
Glazing choice directly shapes thermal transfer (U-value), solar heat gain coefficient (SHGC), daylighting, glare, and occupant thermal comfort.Lifecycle costs differ by fabrication, installation speed, maintenance, leak risk, and replacement complexity; unitized often reduces site labour but increases fabrication cost.
2025
12
30
Design a redundant drainage path, pressure-equalised zones, back-pans, and compatible sealants; control staining from water pathways and metal corrosion.
2025
12
30
no data
Architectural Solutions
Contact Info
E-mail: info@prancebuilding.com
Tel: +86-757-83138155
Tel/Whatapps: +86-13809708787
Fax: +86-757-83139722
Office: 3F.1st Building,No.11 Gangkou Rd, Chancheng, Foshan, Guangdong.
Factory: 169, South Area, Base of Electrical and Electronic lndustry, Baini, Sanshui, Foshan, Guangdong.
Copyright © 2025 PRANCE Metalwork Building Material Co.,Ltd - Prancebuilding.com |Sitemap