PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
In a hospital, a wall is part of the cleaning plan.
Every surface in a clinical area is wiped, sprayed and disinfected again and again, sometimes several times a day, with chemicals far stronger than anything used in an office, and any material that scratches, absorbs, cracks or holds dirt in its joints slowly becomes a place where contamination can hide.
That changes how wall finishes are chosen.
Metal wall panels for hospitals are popular because coated metal is hard, smooth and non-porous. But the panel is only part of the answer. Joints, edges, fixings and finish chemistry decide whether the wall stays hygienic for years.
They are used because coated metal surfaces are smooth, non-porous, durable and easy to clean, and they resist many hospital cleaning chemicals.
Non-porous surfaces do not absorb fluids
Hard coatings resist scratching from trolleys and beds
Large panels reduce the number of joints
Removable systems give access to services behind the wall
Metal does not support mold growth the way some organic materials can
Durability matters too. Scratches hold dirt. A damaged wall is harder to clean.
Corridors, waiting areas, clean utility rooms, imaging suites and some treatment rooms commonly use interior metal wall panels, with operating rooms often using specialist sealed panel systems.
|
Area |
Main requirement |
Typical approach |
|
Corridors and lobbies |
Impact and cleaning |
Durable coated panels, protection at bed height |
|
Waiting areas |
Cleaning and appearance |
Smooth finishes, acoustic options where needed |
|
Clean utility and pharmacy |
Hygiene and chemical resistance |
Sealed joints, resistant coatings |
|
Imaging and plant areas |
Access and durability |
Removable panels |
|
Operating rooms |
Strict cleanability and air control |
Specialist sealed panel systems |
Design guidance such as the FGI Guidelines for Design and Construction of Hospitals sets requirements for cleanable finishes in many areas. Follow the version adopted by the project’s authority.
Joints are where dirt and microbes collect, so hospital panel systems use tight, sealed or flush joints in clinical areas and avoid open reveals where cleaning is critical.
Open joints may look sharp in an office. In a ward, they collect dust and are hard to wipe.
Sealed joints need compatible sealants that resist the cleaning chemicals in use. Coved or radiused corners at floor and wall junctions are often specified to make cleaning easier.
They can add a supporting layer of protection, but they do not replace cleaning, and their claims should be checked against recognized test methods such as ISO 22196.
Some powder coatings and paints include antimicrobial additives, often silver-ion based. Tests measure reduction of bacteria on treated surfaces under laboratory conditions. Real hospital performance depends heavily on cleaning practice.
Treat antimicrobial coatings as an extra. Not as a substitute for good detailing and cleaning.
The finish has to survive the cleaning program. Every day of it.
Hospitals use quaternary ammonium compounds, chlorine solutions, hydrogen peroxide and alcohol-based products. Ask the coating supplier for chemical resistance results against the specific products the hospital uses, and check that the warranty covers that cleaning regime.
High-performance powder coat and PVDF finishes both perform well in many settings. Very low gloss finishes hide marks but can be harder to clean, so mid-range gloss is a common compromise.
Beds and trolleys hit walls every day. Use protection rails and corner guards, or thicker panels at bed height.
Fire rules apply too. Interior finishes must meet the flame spread class set by the building code for each area, commonly tested to ASTM E84. Exterior walls follow the normal fire rules for the building, including NFPA 285 where combustible components are present.
Removable panels give engineers access to medical gas, data and plumbing without breaking the wall. That reduces dust during maintenance, which matters in occupied hospitals.
Hospitals never close. Envelope performance affects their energy use for decades.
PRANCE’s Saudi Arabia Hospital Project used a hidden-frame glass curtain wall with an aluminum profile of 70 by 140 mm and a profile thickness of 3 mm, glazed with 6 mm Low-E glass, a 12 mm air space and 6 mm glass, across a project area of about 15,000 square meters. The profile depth, glass build-up and supporting connections were assessed as one coordinated system, which is the same approach that suits metal wall panels on the rest of a hospital envelope.
Hospital walls must be easy to clean, hard to damage and simple to access.
Choose smooth, non-porous coated panels, seal joints in clinical areas, confirm chemical resistance against the actual cleaning products, treat antimicrobial coatings as a supplement, protect walls from impact and use removable panels where services sit behind. Those priorities sit within the broader requirements by building type that shape every hospital envelope.
Yes. Coated metal is smooth, non-porous and durable, which makes it easy to clean and disinfect when joints and finishes are chosen correctly.
In clinical areas, usually yes. Sealed or flush joints are easier to clean than open reveals.
No. They can reduce bacteria on surfaces in lab tests, but they support cleaning rather than replace it.
Those the hospital actually uses, often including quaternary ammonium compounds, chlorine solutions, hydrogen peroxide and alcohol products.
Many projects follow the FGI Guidelines for Design and Construction of Hospitals, alongside the building code’s interior finish rules.
*We will reply within 24 hours. If you don't receive our email, please check your spam folder. For urgent inquiries, please reach out via WhatsApp: +86-13809708787
* Kindly ensure your email and phone number are correct so our specialist can reach you promptly, or you can send a message to our whatsapp +86-13809708787