PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
A meeting room with persistent echo needs a different wall treatment from one where conversations carry through from the next office. Both problems can make a space uncomfortable, but the same panel will not necessarily solve them.
For speech-related echo in offices and meeting rooms, tested fabric-wrapped and PET products are practical starting options when comparing sound-deadening panels for walls. Wood-slat and perforated metal acoustic systems suit interiors where the wall finish is a major design requirement. Noise passing between rooms usually requires attention to the wall construction. This guide compares the options and explains how to narrow the selection for an interior project.
Listen to where the disturbance comes from before choosing a material. If voices linger after someone stops speaking, or several conversations blend into a harsh background, reflected sound may be the main issue. Wall absorbers help with sound absorption, reducing reverberation and making speech easier to follow.
Sound transmission through a partition is another matter. Surface-mounted absorbers may improve acoustics in the treated room, but they cannot be relied on for the sound isolation needed for confidential meetings.
The best soundproofing materials for walls must work within a suitable wall assembly. Cavity insulation, gypsum board layers and sealed joints can contribute to that assembly. Doors, service openings and adjoining construction can still let sound pass through or around the partition.
Some spaces need both treatments. A meeting room may echo while conversations also carry into the next office. Identify both issues early so a decorative wall treatment does not consume the budget intended for privacy.
For room absorption, compare finished products rather than assuming one material is always superior. The panel's construction matters as much as its visible surface. Two products with similar colours and dimensions may have different cores, thicknesses or installation requirements.
The table provides an initial shortlist, not a performance ranking. Each category still requires product-specific performance information.
|
Panel Type |
Prioritise It When |
Main Trade-off / Check |
|
Fabric-wrapped mineral wool or glass wool |
Room absorption and a coordinated fabric finish lead the brief |
The selected fabric must suit daily contact and cleaning |
|
PET felt |
A light, textured finish or shaped wall features are preferred |
Thin decorative felt and thicker absorbers may perform differently |
|
Wood-slat acoustic panels |
Timber appearance is a firm design requirement |
Slats alone do not establish absorption; check backing and installation |
|
Perforated metal acoustic panels |
Metal finishes, durability and custom layouts lead the brief |
Evaluate the perforated face, backing or infill, and total system depth |
|
Acoustic foam panels |
Exposed foam suits the room’s acoustic purpose and interior brief |
It may not meet the finish or maintenance expectations of a commercial interior |
Fabric-wrapped panels can be coordinated with upholstery and other interior finishes, but the fabric is more than a colour choice. Mineral wool or glass wool forms the absorptive core, and sound must be able to pass through the fabric to reach it. Where people regularly touch the panels, the selected surface also needs to tolerate the planned cleaning routine.
PET felt offers more flexibility in appearance, from continuous wall areas to individual decorative elements. A thin felt finish, though, is not interchangeable with a thicker acoustic panel. A colour sample cannot tell you how well either product absorbs sound. The documented acoustic performance needs to be checked before the finish is approved.
A timber rhythm may be exactly what the interior calls for. With wood-slat panels, however, the slats alone do not establish acoustic performance. Confirm what sits behind them. Advertised results may depend on additional backing or a particular installation.
Perforated metal acoustic wall panels pair a metal face with acoustic treatment behind it. Sound interacts with the backing or infill through the perforations. When comparing these panels with fabric or felt, the metal finish and cleaning instructions also deserve attention.
An exposed foam finish may work well in a dedicated audio room. In a reception area, the same finish could be unsuitable. Price alone is not enough to justify sound-deadening foam panels in a commercial specification; appearance, maintenance and fire-performance requirements still apply.
For a meeting room where speech clarity leads the brief, tested fabric-wrapped and PET products are sensible starting points. Timber or metal finishes remain options, but the corresponding acoustic system must be assessed against the same room requirement.
Two acoustic wall panels may offer similar sound absorption but perform very differently in an occupied interior. One may require more installation depth than the room allows; another may have a finish that is difficult to maintain along a busy circulation route. A suitable NRC rating is a starting point, not the final answer.
The bigger mistake is expecting sound-deadening panels for walls to solve a problem caused by the wall construction itself. If conversations remain audible between rooms, even a well-designed acoustic panel cannot replace proper sound isolation. For room absorption, compare the actual panel construction, tested performance and installation requirements before approving the finish.
Where perforated metal acoustic wall panels suit the interior design, PRANCE team can support the selection of panel finishes and acoustic configurations. Contact us for a quotation based on your project requirements.
Yes. Many acoustic wall panels can be installed over existing drywall, provided the wall and fixing method can support the panel weight. Lightweight panels may use manufacturer-approved adhesive or mechanical fixings, while heavier systems may need to be secured to studs or suitable backing. Check the installation instructions and any building or landlord restrictions before installation.
No. Partial wall coverage is often sufficient to reduce echo and improve room acoustics. The required area depends on room size, existing absorptive surfaces and the intended acoustic improvement. A room with an effective acoustic ceiling may need less wall treatment than one with mostly hard finishes. There is no universal coverage percentage; panel placement and the room's overall sound absorption matter more.
Some acoustic wall panels can be painted, but only when the manufacturer approves the coating and application method. Paint can block pores or perforations and reduce sound absorption. Fabric-wrapped and PET felt panels are generally better specified in the required factory colour rather than painted on-site. Always check the product instructions before changing the finish.
Most thin acoustic wall panels are more effective at absorbing mid- and high-frequency sound than low-frequency bass. A thin panel may provide some bass absorption, but this needs to be supported by frequency-specific test data rather than NRC alone. If bass noise is passing through from another room, improving the separating wall construction is usually more relevant than adding surface absorbers.
*We will reply within 24 hours. If you don't receive our email, please check your spam folder. For urgent inquiries, please reach out via WhatsApp: +86-13809708787
* Kindly ensure your email and phone number are correct so our specialist can reach you promptly, or you can send a message to our whatsapp +86-13809708787