PRANCE metalwork is a leading manufacturer of metal ceiling and facade systems.
Most sound-absorbing wall panels are not made of a single material; instead, they consist of sound-absorbing core material, visible finish, frame or backboard, as well as installation connecting parts.
However, not all products have independent core materials: PET panels can perform both decorative and sound-absorbing functions simultaneously, while some micro-perforated systems rely on the panel and air cavities to function.
|
Component |
Common Materials |
Main Function |
|
Absorptive core |
Fiberglass, mineral wool, PET, open-cell foam |
Absorbs sound energy entering the material |
|
Surface facing |
Acoustically transparent fabric, wood slats, perforated wood, perforated metal |
Provides appearance and protection, or contributes to the acoustic design |
|
Acoustic backing |
Acoustic fleece, absorptive insulation, and similar materials |
Works with the facing to form a sound-absorbing system |
|
Frame and fixings |
Timber frames, metal frames, mounting hardware |
Maintains panel shape and secures it to the wall |
|
Air gap |
Space between the panel and wall |
Changes sound absorption at certain frequencies |
Therefore, what you need to confirm with the developer is how this board performs under the specified thickness, backing material and installation conditions? Rather than merely asking what material it is made of?
Glass fiber is a common core material for fabric-covered sound-absorbing panels. The pores between the fibers allow sound waves to enter the material and reduce reflected sound through internal losses. It can be used for acoustic treatment in meeting rooms, office spaces, recording environments, and home theaters.
When selecting, it is necessary to check the thickness, specific material specifications, surface layer, and installation method. Thicker sound-absorbing structures are usually more conducive to extending to low frequencies, but one cannot simply infer the low-frequency capability based on the name "glass fiber board".
The visible surfaces of the wood strip panels and perforated wood panels mainly provide decorative effects and may also contribute to acoustic performance. The PRANCE Perforated baffle plank is used in combination with SoundTex acoustic film or rockwool or other sound-absorbing materials, rather than relying solely on the wood grain surface for sound absorption. The wood grain is coated with AkzoNobel powder coating and Salide wood grain technology. This significantly balances aesthetics and practicality.
Just by looking at it, you can tell that this mineral fiber sound-absorbing board is not only energy-efficient but also lightweight and easy to maintain. It is worth noting that the PRANCE acoustic mineral fiber board is made of high-quality mineral fibers, and it has a natural porous fiber structure inside.
When sound waves enter the panel, the pores between the fibers will effectively consume the energy of the sound waves, thereby significantly reducing the noise level in the room. The surface is combined with micro pores and precise perforation design, which not only further optimizes the acoustic performance but also efficiently absorbs and weakens the indoor echo.
It has excellent noise reduction coefficient (NRC 0.5) and ceiling sound attenuation coefficient (CAC minimum 30), and performs well in reducing indoor noise reflection and isolating the sound transmission between adjacent spaces.
The best material for acoustic panels is aluminium. High-quality aluminum material, with the precise punching process design by PRANCE, enables sound waves to smoothly enter the interior of the sheet and undergo multi-dimensional reflection and dissipation. The perforated design, combined with the professional acoustic materials on the back, can efficiently capture and absorb sound wave energy, thereby significantly reducing indoor echoes and unwanted noises.
The rule that higher density means better sound absorption is not universal. For porous sound-absorbing materials, sound needs to be able to enter the material and then generate losses within. Thickness, air flow resistance, and installation configuration should all be taken into consideration together.
Thickness usually affects the frequency range that can be processed. Thin components are more suitable for partial mid-to-high frequency reflection control, while thicker structures and appropriate air layers may improve absorption at lower frequencies. For music, home theater, or equipment noise projects, it is best to check the frequency-specific sound absorption data rather than relying solely on average indicators.
The backing is also important. Replacing fabrics, adding soundproof finishes, or removing the original filling layer may cause the final installation to no longer correspond to the original test configuration. Therefore, the system data should be rechecked before replacing the materials.
The building of the Kuwait National Security Agency. The building of the Kuwait National Security Agency. In the extreme climate conditions of the Middle East, it is necessary to ensure that both the exterior walls and the indoor systems have excellent corrosion resistance and durability.
At the same time, the internal space needs to properly address the echoes and noise interference caused by strict confidentiality and high population density, achieving a balance between the acoustic environment and safety and privacy.
In this project, perforated metal wall panels demonstrated extremely high engineering value in the field of sound absorption:
The custom perforated background wall project of PRANCE's Malaysian office showcases the application of perforated patterns in interior walls, serving as a reference for material appearance and custom design.
However, the project images and design descriptions cannot replace acoustic tests. If such walls are to be used in meeting rooms, restaurants, or audio-visual rooms, additional confirmation of backing, cavity depth, sound absorption data, and installation construction is necessary. One cannot infer the noise reduction effect merely based on the appearance of the case.
When determining the best material for acoustic panels, it is recommended to obtain a complete list of materials, product test data and installation details, rather than just color samples.
The key points to confirm are what the core material and the surface layer are respectively, whether the quotation includes the backing and hangers, which thickness and installation method the test corresponds to, and whether the fire safety documents are applicable to the final product. For PRANCE custom metal walls, the equipment hole drilling, module partitioning and maintenance requirements should also be included in the detailed drawings to ensure that the supply structure is consistent with the design.
When choosing acoustic wall panels, the focus is not on the specific material name, but on how the complete structure can meet the needs of the room. The core material, finish, backing, and installation method should all be taken into consideration during the selection process.
The PRANCE perforated metal wall panels can be used as a solution that requires customized appearance and durable surface layer. If you have relevant design drawings, please bring them along for consultation. Even if you only have design blueprints, PRANCE can also implement your ideas.
Common materials include glass fiber, mineral wool, PET, and perforated foam. There are also systems that combine wood or metal finishes with sound-absorbing backings.
Solid metal mainly reflects sound. When used for sound absorption, perforations, backings, and air layers need to be configured according to specific products.
Not necessarily. The thickness, structure and testing conditions should be compared instead of just looking at the material name or density.
It depends on the system design. Some perforated structures rely on the panel and the air cavity to work, while other products are combined with a backing.
It is necessary to confirm the metal panel, hole type, backing, air layer and installation method, and obtain acoustic data that matches the specified configuration.
*We will reply within 24 hours. If you don't receive our email, please check your spam folder. For urgent inquiries, please reach out via WhatsApp: +86-13809708787
* Kindly ensure your email and phone number are correct so our specialist can reach you promptly, or you can send a message to our whatsapp +86-13809708787