Problems and solutions after the installation of aluminum gusset ceiling

After the installation of the aluminum gusset ceiling was completed, individual problems were found. The cause of this phenomenon can basically be determined to be the negligence of the construction workers, or it may be other reasons. Lets take a look at the problems and solutions that arise after the installation of aluminum gusset ceilings.

1. After the aluminum gusset ceiling is installed, gaps appear in a large area.

For matching keels produced by regular manufacturers, the aluminum buckle plates are very tight after being fastened, and the tooth pitch of the keels and plates is also very precise. If this happens, it is very likely that the aluminum gusset plate and keel you bought are not matching products.

2. After the installation of the aluminum gusset ceiling is completed, the corners become warped or the glue is peeled off within half a month.

There are generally two ways to install corners. Different installation methods have different reasons for corner warping.

A few years ago, gluing corners was the most common method. However, some workers may have warped corners due to insufficient glue or poor glue quality during installation. This method is no longer used by regular decoration companies because it has too many side effects.

Use the installation method of first drilling holes in the wall, aligning the corner holes with the wall holes, and then fixing the corners to the wall with nails. The advantage of this method is that it does not use glass glue and the fixation is relatively firm. Not easy to fall off. However, using this method to fix the wall tiles requires the owner to ensure that there is no problem with the wall tiles and that there will be no holes. If there are holes in the wall tiles, it will easily crack the wall tiles. Therefore, this method can also test the wall tile pasting technology.